NovaSeal

INDUSTRIAL WOOD SEALER

NovaSeal marine grade wood finish is a high-quality, deep-penetrating water-based finish and sealer that protects and beautifies industrial wood flooring. Our fast drying formula is perfect for Dry Vans, Delivery Vehicles, Cargo Trucks, Enclosed Trailers, and Railcar Flooring.

Our super low VOC formula is safe to use in enclosed spaces. NovaSeal utilizes nanotechnology-based resins to protect and enhance the natural beauty of wood. We designed NovaSeal to be the best water-based wood finish ever produced.

LASTING PROTECTION

NovaSeal wood sealer offers long lasting protection for the most demanding industrial applications.

RAPID DRY™ TECHNOLOGY

Dries to the touch in approximately 30 minutes, depending on temperature and humidity.

LOW VOC

Made with all natural products. No harmful chemicals.

MARINE GRADE

Marine grade components.

SURFACE PREPARATION

Wood must be correctly prepared to allow NovaSeal to fully penetrate into the wood fibers for optimal results. Surface must be clean, dry, and free of mildew, stains, dirt, dust, loose wood fibers, and any other contaminant. Weathered wood must be sanded or pressure washed so that only clean, bright, fresh wood is visible. Surface must be completely dry with wood moisture content below 15%. We recommend that exterior wood be exposed to at least three days of dry weather before application of finish. New wood may require additional preparation to open up the wood grain prior to application if a sheen or mill glaze exists.

APPLICATION

After surface preparation, shake or stir the can for at least one minute prior to opening. LIBERALLY apply with a brush, roller, pump-up sprayer, or airless sprayer. If a second coat (recommended) is desired, it must be applied "wet-on-wet"—that is, within an hour of the first application, while the surface is still damp to the touch. Apply at temperatures above 45 ºF (7 °C). Coverage will range from 300 to 500 SF for hardwoods and 200 to 300 SF for softwoods. Allow 24 hours before use. NovaSeal should not be thinned with water or solvents. NovaSeal can be tinted with water-based colorants

RECOMMENDED USES

Perfect For: Dry Vans, Delivery Vehicles, Cargo Trucks, Enclosed Trailers, Railcar Flooring, and other industrial applications. Can be used on all Hardwoods and Softwoods including Apitong, Keruing, Brazilian Apitong, Angelim Pedra, Purpleheart, Eucalyptus, Rubberwood, Red Oak, White Oak, Maple, Southern Yellow Pine, Douglas Fir and more.

Learn More about NovaSeal