Section 06 15 00 Tropical Hardwood Decking and Deck Tiles
Nova guide specification, CSI SectionFormat. Answer the project questions and the spec rewrites itself: options resolve, unused species drop out, and fire, coastal and warranty requirements follow your choices. Click any [bracket] to choose by hand.
SECTION 06 15 00
TROPICAL HARDWOOD DECKING AND DECK TILES
SPECIFIER NOTEThis guide specification is written in CSI SectionFormat and PageFormat for editing by the design professional. Specifier notes (shaded) and bracketed options [ ]✕ must be edited or deleted before issue. Highlighted items [...]✕ are manufacturer data to be confirmed by Nova USA Wood Products before this document is published.
SPECIFIER NOTEThis section is based on products of Nova USA Wood Products, 3821 24th Avenue, Forest Grove, OR 97116. Tel: (503) 419-6407. Email: sales@novausawood.com. Web: www.novausawood.com. BIM files for rainscreen, decking and clip profiles, profile drawings, installation guides and warranties are at www.novausawood.com/downloads. Technical support, samples and AIA continuing education presentations are available from the manufacturer.
SPECIFIER NOTEThis section covers exterior tropical hardwood deck boards, stair treads, dimensional lumber for rails and posts, and pedestal-set deck tiles. For modified wood decking, use the Nova Modified Wood Decking section.
PART 1 - GENERAL
1.1SUMMARY
A.Section Includes:
1.Hardwood deck boards and stair treads.
2.[Hardwood dimensional lumber and posts for rails and benches.]✕
3.[Hardwood deck tiles on pedestals.]✕
4.Fasteners[, concealed deck clips]✕ and end-grain sealer.
B.Related Requirements:
1.Section 03 30 00 "Cast-in-Place Concrete" for deck tile substrates.
2.Section 06 10 00 "Rough Carpentry" for deck framing.
3.Section 07 10 00 "Dampproofing and Waterproofing" for membranes below deck tiles.
4.Section 09 93 00 "Staining and Transparent Finishing."
1.2REFERENCES
A.ASTM D143 - Small Clear Specimens of Timber.
B.ASTM E84 - Surface Burning Characteristics of Building Materials.
C.California State Fire Marshal SFM Standard 12-7A-4 - Decking.
D.ASTM D1761 - Standard Test Methods for Mechanical Fasteners in Wood.
E.USDA Forest Products Laboratory Wood Handbook, decay resistance ratings.
1.3PERFORMANCE REQUIREMENTS
A.Decay Resistance: Heartwood rated "very resistant" or "resistant" to decay (Class 1 or 2) by USDA Forest Products Laboratory or Oregon State University Forest Research Laboratory.
B.Structural: Deck boards shall support a uniform live load of [100 psf (4.8 kPa), residential] [200 psf (9.6 kPa), commercial] on joists spaced not more than: 5/4 x 4, 5/4 x 6, 2 x 4 and 2 x 6 boards, 24 inches (610 mm) o.c. perpendicular or 16 inches (406 mm) o.c. diagonal; 1 x 4 and 1 x 6 boards, and Fijian Mahogany in all sizes, 16 inches (406 mm) o.c. perpendicular or 12 inches (305 mm) o.c. diagonal.
C.Fastener Withdrawal: Average screw withdrawal not less than 1,100 lb at maximum load per ASTM D1761.
D.Fire-Test-Response Characteristics:
1.Surface-Burning Characteristics: ASTM E84 values for each species listed in Part 2.
2.[Wildland-Urban Interface: Decking shall comply with SFM Standard 12-7A-4.]✕
SPECIFIER NOTEFire test basis (reports available from Nova): Bangkirai - ASTM E84 Class A, FSI 25 / SDI 110 (QAI RJ9000F-2a, 2023); SFM 12-7A-4 Part A (QAI TUL0384-3, 2023) and Part B (QAI RJ9000F-1, 2023), extended to 1x4, 1x6, 5/4x4 and 5/4x6 by QAI engineering evaluation RJ9000-EEV. Batu - ASTM E84 Class A, FSI 25 / SDI 65 (QAI RJ1382-1, 2011); SFM 12-7A-4 Part A and San Diego County Class B burning brand (WFCi 10133, 2010). Ipe - SFM 12-7A-4 Part A and San Diego County Class B burning brand (WFCi 10133, 2010); ASTM E84 not tested by Nova. Torem - not tested. Doju - ASTM E84 testing in progress; not tested to SFM 12-7A-4. Batu (red balau) and Ipe also appear on the CSFM Building Materials Listing under other manufacturers; many jurisdictions accept a listed species from any supplier. Confirm acceptance with the authority having jurisdiction. Retain the WUI requirement only with tested or listed species.
1.4ACTION SUBMITTALS
A.Product Data: For each product, include species, grade, profile, moisture content, physical and mechanical properties, and finish.
B.Shop Drawings: Show layout, profiles, attachment, clip and fastener spacing, joints, terminations, penetrations, and transitions to adjacent construction.
C.Samples for Initial Selection: Manufacturer's standard samples showing range of color and grain for each species and factory finish specified.
D.Samples for Verification: Two samples of each species, profile and finish, not less than 12 inches (305 mm) long, showing expected range of color and grain.
1.5INFORMATIONAL SUBMITTALS
A.Product Test Reports: From a qualified independent testing agency, indicating compliance with the performance requirements in Part 2, including fire-test-response characteristics.
B.Manufacturer's Installation Instructions: Current editions of the manufacturer's published installation guides referenced in Part 3.
C.Legality Documentation: Manufacturer's declaration that wood products are legally harvested and imported in compliance with the U.S. Lacey Act, maintained under the manufacturer's written Lacey Act Compliance Program (supplier due-diligence questionnaire covering species, country and region of harvest, harvest permits and CITES status; PPQ 505 import declarations; seven-year record retention). Documentation available on request.
D.Sustainability Documentation: Manufacturer's LEED v4/v4.1 alignment statement (www.novausawood.com/PDFs/Nova-LEEDS-Alignment.pdf).
SPECIFIER NOTENova's source mills hold FSC or PEFC certification, but Nova does not currently hold its own chain-of-custody certificate, so products are not sold with a certified claim and do not contribute to LEED MR sourcing credits as supplied. Where certified wood is required, contact Nova before bid to arrange certified supply.
E.Acclimation Record: Dated moisture-meter readings, with photographs, of boards selected at random throughout each delivery, and the site equilibrium moisture content, submitted before installation begins.
1.6CLOSEOUT SUBMITTALS
A.Maintenance Data: Manufacturer's published maintenance guide for each product and finish.
B.Warranty: Executed manufacturer's warranty as specified.
1.7QUALITY ASSURANCE
A.Manufacturer Qualifications: A firm with not less than 10 years of experience supplying products of the type specified.
B.Installer Qualifications: A firm with not less than one year of experience installing hardwood decking in solid wood (not composite or PVC) of similar scope, familiar with the manufacturer's installation guides referenced in Part 3.
C.Mockups: Build mockup not less than 8 feet (2.4 m) by 8 feet (2.4 m) [and one 4-by-4 tile field on pedestals]✕, including selected finish to verify selections, workmanship, attachment and finish.
1.Approval of mockup does not constitute approval of deviations from the Contract Documents.
2.Approved mockup may become part of the completed Work if undisturbed at Substantial Completion.
D.Preinstallation Conference: Conduct at Project site with Installer and manufacturer's representative. Review storage, acclimation and the Acclimation Record.
1.8DELIVERY, STORAGE, AND HANDLING
A.Deliver materials with packing list identifying species, grade, profile, quantity and lengths, and accessories.
B.Store materials flat, off the ground on level supports not less than 4 inches (100 mm) above grade, under breathable cover that sheds water while allowing air circulation. Do not wrap tightly in polyethylene.
C.Acclimate materials at Project site in accordance with manufacturer's "Acclimating Siding and Decking" guide (https://www.novausawood.com/PDFs/acclimating-siding-decking.pdf) until average moisture content is within 2 percent of the site equilibrium moisture content (EMC). Do not base acclimation on time alone.
1.Restack with stickers not less than 3/4 inch (19 mm) thick spaced not more than 12 inches (305 mm) apart; keep stacks out of direct sun and water, with covers held off the stack.
2.Verify with a moisture meter on boards selected at random throughout the stack; record, date and photograph readings and submit to the Architect as the Acclimation Record before installation begins.
D.Tannin Bleed (Batu, Bangkirai, Torem, Ipe, Doju): These species contain water-soluble extractives (tannins) that bleed when wet and can stain concrete, masonry, stone and light-colored adjacent finishes. Store away from these surfaces with the ground beneath covered, protect adjacent surfaces from runoff during construction, and clean any staining in accordance with the manufacturer's maintenance guide. Bleeding diminishes after the first several rains.
1.9WARRANTY
SPECIFIER NOTEManufacturer's warranties apply to residential and commercial projects and cover material only; labor is excluded. Confirm terms against the current published warranty documents before issue.
A.Hardwood (Batu, Bangkirai, Torem, Ipe, Doju): Manufacturer's limited warranty that the wood will not suffer structural damage from rot, decay or termites for 25 years from date of purchase. Remedy at manufacturer's option: replacement boards, repair, or cash compensation prorated by years in service; labor excluded. Register within 90 days after installation per manufacturer's procedure (www.novausawood.com/warranty-registration), with dealer receipt and project photo; include the registration confirmation with closeout submittals. Reference: Nova Durable Tropical Hardwood Warranty (https://www.novausawood.com/PDFs/nova-durable-tropical-hardwood-warranty-2026.pdf).
SPECIFIER NOTEFijian Mahogany is not covered by a manufacturer's warranty.
B.[Clips: Manufacturer's limited lifetime warranty for ExoDek QuickClip, as defined in the manufacturer's published warranty. Register the warranty in the Owner's name within 90 days of purchase at www.novausawood.com/warranty-registration and include the registration receipt with closeout submittals. Reference: ExoDek QuickClip Warranty (https://www.novausawood.com/PDFs/nova-decking-clips-warranty.pdf).]✕
PART 2 - PRODUCTS
2.1MANUFACTURERS
SPECIFIER NOTEChoose ONE of the two options below. Option 1 (basis of design) is recommended for most public and private work: it names Nova while allowing the contractor to propose an equal under Division 01. Use Option 2 (proprietary) only where the Owner permits a sole-source specification.
A.Basis-of-Design Product: Subject to compliance with requirements, provide [Batu] [Bangkirai] [Torem] [Ipe] [Doju] [Fijian Mahogany] hardwood decking [and Nova ExoTile deck tiles]✕ by Nova USA Wood Products, Forest Grove, Oregon; www.novausawood.com.[ Concealed deck clips: Nova ExoDek QuickClip.]✕
1.Comparable Products: Products of other manufacturers will be considered when they meet every performance requirement of this Section, documented by test reports from independent laboratories, and are approved by the Architect in accordance with Section 01 60 00 - Product Requirements.
2.Substitutions: Not permitted.
B.Source Limitations: Obtain each product type, including [clips, ]✕fasteners, end sealer and factory finish, from a single source through one manufacturer.
2.2HARDWOOD SPECIES
SPECIFIER NOTEProperties per ASTM D143 small clear specimens at 12 percent moisture content. Retain species selected.
| Species (Basis of Design) | Botanical name | MOR (psi) | MOE (psi) | Density | Janka min. | E84 |
| Batu / Red Balau (Nova Batu) | Shorea guiso (red balau group) | 18,400 | 2,560,000 | 850 kg/m3 | 2,000 lbf | A |
| Bangkirai / Yellow Balau (Nova Bangkirai) | Shorea laevis | 20,950 | 2,900,000 | 930 kg/m3 | 2,000 lbf | A |
| Torem (Nova Torem) | Manilkara spp. | 29,200 | 3,450,000 | 980 kg/m3 | 3,000 lbf | Not tested |
| Ipe (Nova Ipe) | Handroanthus spp. | 25,400 | 3,140,000 | 1,020 kg/m3 | 3,000 lbf | Not tested |
| Doju (Nova Doju) | Buchenavia tetraphylla | 22,480 | 2,240,000 | 950 kg/m3 | 3,680 lbf | In progress |
| Fijian Mahogany (Nova Genuine Mahogany) | Swietenia macrophylla, plantation grown in Fiji | 11,500 | 1,494,000 | 650 kg/m3 | 800 lbf | Not tested |
SPECIFIER NOTEIpe (Handroanthus spp.) is listed in CITES Appendix II. Imports require CITES export permits, which can extend lead times. Doju (Buchenavia tetraphylla) is not CITES-listed and is offered as an alternative with comparable hardness and durability and lower shrinkage (3.6 percent radial, 5.1 percent tangential per Nova testing, 2025).
SPECIFIER NOTEFijian Mahogany (Swietenia macrophylla, sold by Nova as Genuine Mahogany) is plantation grown in Fiji and finished in the U.S. Heartwood rates as durable against decay fungi and moderately resistant to dry-wood termites; shrinkage 3.0 percent radial, 4.1 percent tangential. As a medium-density hardwood it is limited to joists at 16 inches (406 mm) o.c. (12 inches diagonal) in all sizes. Not tested to ASTM E84 or SFM 12-7A-4.
A.Grade: [Ipe: FAS Clear] [Doju: First Clear] [Fijian Mahogany: clear heartwood, essentially sap-free] [Batu, Bangkirai, Torem: Standard and Better (equivalent to First Clears / Select and Better, sap-free)], graded for serviceable appearance on face and two edges.
B.Moisture Content: Kiln dried to 12 to 14 percent at time of shipment. Acclimate to project-site equilibrium moisture content before installation, particularly in dry climates.
2.3DECK BOARDS AND LUMBER
A.Deck Boards: Surfaced four sides, edges eased to 3/32-inch (2 mm) radius; [smooth (S4S E4E)] [grooved for concealed clips].
1.Sizes: [1 x 4] [1 x 6] [5/4 x 4] [5/4 x 6] [2 x 4] [2 x 6] nominal (availability: 2 x 4 and 2 x 6 deck boards in Batu and Ipe; Batu and Ipe 1x2 through 2x12 plus 4 x 4 and 6 x 6; Bangkirai, Torem and Doju 1 x 4, 1 x 6, 5/4 x 4 and 5/4 x 6; Fijian Mahogany 1 x 4, 5/4 x 4, 5/4 x 6, 2 x 4 and 2 x 6), dressed to American Softwood Lumber Standard (PS 20) sizes or standard industry practice: 1x nominal = 3/4 inch (19 mm) net; 5/4 nominal = 1 inch (25 mm) net; 2x nominal = 1-1/2 inches (38 mm) net. Net widths: 2 = 1-1/2 in.; 3 = 2-1/2 in.; 4 = 3-1/2 in.; 6 = 5-1/2 in.; 8 = 7-1/4 in.; 10 = 9-1/4 in.; 12 = 11-1/4 in.
2.[Groove (for clips): 3/16 inch (5 mm) high, lower edge 13/32 inch (10 mm) above bottom face, depth 1/2 inch (13 mm). Profile drawings: Nova Standard Profiles (www.novausawood.com/standard-profiles; downloadable SVG drawings).]✕
B.[Dimensional Lumber (Batu, Ipe): S4S, eased edges; 1 x 2 through 2 x 12 nominal; posts 4 x 4 and 6 x 6.]✕
C.Lengths: [8 to 20 feet (2.4 to 6.1 m), even lengths] [Specified lengths, cut to length by manufacturer: ].
D.Dimensional Tolerance: Net dimensions plus 0 inch, minus 1/16 inch (1.5 mm) at time of manufacture; boards within a production batch plus or minus 1/64 inch (0.4 mm). Dimensions change with moisture content during acclimation.
2.4DECK TILES
A.Deck Tiles: Nova ExoTile Batu deck tiles, 23-7/8 by 23-7/8 by 1-11/16 inches (606 by 606 by 43 mm), smooth surface, predrilled corners for tile connectors, grooved corners for pedestal tabs.
B.Tile Connectors: DeckWise deck tile connectors or equal, color [brown] [black].
C.Pedestals: Adjustable self-leveling pedestals, DeckWise Altitudes [SJB-4156 screw-jack base, 4-5/32-inch minimum height] [SPVC-2656 stationary base, 2-21/32-inch minimum height] or equal, sized for load and height indicated.
D.Edge Trim: Batu trim fabricated from 2 x 4 (1-1/2 by 3-1/2 inches net) with eased top edge, mitered at corners.
2.5ATTACHMENT
A.[Concealed Clips: Nova ExoDek QuickClip, glass-fiber-reinforced nylon, screwed to joists; holds boards above joists for airflow and sets a 1/4-inch (6 mm) gap between boards.]✕
B.[Clip Screws: 1-5/8-inch (41 mm) #7 Type 305 stainless steel T-15 Torx-drive screws, with driver bits, supplied with the clips. Within 20 miles (32 km) of salt water, do not use the supplied screws; furnish separate Type 316 stainless steel screws of the same size.]✕
C.Face Fasteners ([all boards, face-screwed installations] [stair nosings and board ends where required]): [Type 304] [Type 316] stainless steel screws sized for 1-1/4 inches (32 mm) minimum penetration into joists, predrilled and countersunk or plugged. Use Type 316 within 20 miles (32 km) of salt water.
D.End-Grain Sealer: Nova ExoWax end sealer, applied to all field-cut ends and any field-drilled holes.
2.6FINISH
SPECIFIER NOTEManufacturer's warranty for clip-attached (hidden-fastener) decking requires pre-grooved boards and an approved oil-based exterior finish on all sides. Face-screwed installations may be left unfinished.
A.Finish: [Unfinished, allowed to weather (face-screwed installations only)] [Nova ExoShield on all four sides, color: , per Section 09 93 00].
PART 3 - EXECUTION
3.1EXAMINATION
A.Verify framing is level and joist spacing does not exceed that specified for the board size: 24 inches (610 mm) o.c. perpendicular or 16 inches (406 mm) o.c. diagonal for 5/4 and 2x boards; 16 inches (406 mm) o.c. perpendicular or 12 inches (305 mm) o.c. diagonal for 1x boards and for Fijian Mahogany in all sizes. For tiles, verify substrate slope and membrane protection.
B.Verify conditions required by manufacturer's warranty: clearance from deck surface to grade not less than 36 inches (914 mm) for 6-inch-wide boards and 16 inches (406 mm) for 4-inch-wide boards; not less than 50 percent unrestricted open area on at least three sides; exposed ground below deck covered with vapor barrier and sloped not less than 1:12 away from structure.
SPECIFIER NOTEInadequate acclimation is the most common cause of field problems with solid wood: open joints, cupping and buckling. Retain the acclimation hold point below.
C.Acclimation: Do not begin installation until the Architect has received an Acclimation Record showing average moisture content within 2 percent of the site equilibrium moisture content. Material installed without an Acclimation Record will be rejected.
3.2INSTALLATION
A.Install in accordance with Nova's "Decking Installation Guide" (https://www.novausawood.com/PDFs/Decking-Installation-Guide.pdf), "Batu Best Practices" (https://www.novausawood.com/PDFs/BatuDecking-BestPractices.pdf)[ and "ExoDek QuickClip Installation Guide" (https://www.novausawood.com/PDFs/ExoDek-QuickClip-Installation-Guide.pdf)]✕, current edition at time of bid (guides are revised quarterly).
B.Predrill all face fasteners. Install boards perpendicular to joists with joints over bearing; stagger end joints; maintain manufacturer's gaps.
C.Set deck tiles on pedestals level and in alignment; connect with tile connectors; install edge trim.
D.Seal all field-cut ends with ExoWax immediately after cutting.
3.3CLEANING AND PROTECTION
A.Protect from construction traffic and staining. Replace damaged boards and tiles.
END OF SECTION
